Price Per Kit : $30.00
Part Number : PH200

This kit contains heaters which have a dual heat setting. The heaters are 5/8" in diameter and 2.030" long. There is a retaining clip welded on to the cartridge which can be adjusted for a snug fit. They operate with 12 VAC or 12 VDC drawing approximately 3 amps for both heaters (1.5 amps per heater) on both heat settings. They can be installed on any machine that has a handlebar with an inner diameter measuring more than 5/8".

Kit Contents
2 Heater Elements
Single Pole Three Position Switch
Hi/Off/Low Switch Plate
2 Mounting Grommets
Insulating Material
Instruction Sheet